Kuiz Fizik Tingkatan 5 Bab 3 Set 1

SELAMAT DATANG Kuiz Fizik Tingkatan 5 Bab 3 Set 1

KUIZ INI MENGANDUNGI 10 SOALAN

Which of the following describes the characteristic of a superconductor?

It has very high resistivity at room temperature.

Its resistance increases dramatically as temperature decreases

It is a type of insulator that becomes a conductor only at very high temperatures.

It can conduct electricity with zero resistance below a certain critical temperature.

None

Which of the following statements correctly distinguishes between an Ohmic conductor and a non-Ohmic conductor?

An Ohmic conductor has a constant voltage, while a non-Ohmic conductor has a constant current.

An Ohmic conductor’s resistance remains constant as current changes, whereas a non-Ohmic conductor’s resistance changes.

Ohmic conductors are typically insulators, while non-Ohmic conductors are metals.

The V-I graph for an Ohmic conductor is a curve, while for a non-Ohmic conductor it is a straight line through the origin.

None

What is the primary advantage of connecting dry cells in series?

To allow the cells to last longer by sharing the current load.

To keep the total voltage the same as a single cell but increase the current capacity.

To decrease the total internal resistance of the power source.

To increase the total electromotive force (e.m.f.) of the power source.

None

A light bulb is labeled '60W, 240V'. What is the resistance of the bulb's filament when it is operating under normal conditions?

14400Ω

0.25Ω

4Ω

960Ω

None

A wire has a resistance R. If the wire is replaced by another wire of the same material and length but with twice the diameter, what will be the new resistance?

R/4

R/2

None

Three resistors with resistances of 6 Ω, 6 Ω, and 6 Ω are connected in parallel. What is the effective resistance of this combination?

18Ω

6Ω

3Ω

2Ω

None

What is the primary reason for using a material like nichrome, which has high resistivity and a high melting point, in the heating element of an electric appliance?

To minimize the electrical energy used by the appliance, making it more efficient.

To efficiently convert electrical energy into heat without melting at high operating temperatures.

To allow the maximum amount of current to flow through the element.

To ensure the element does not conduct electricity and remains safe to touch.

None

If an appliance with a power rating of 100 W is used for 3 hours a day for 30 days, how much electrical energy does it consume in kilowatt-hours (kWh)?

9 kWh

9000 kWh

90 kWh

0.9 kWh

None

A dry cell has an e.m.f. of 1.5 V and an internal resistance of 0.5 Ω. If it is connected to an external resistor of 2.0 Ω, what is the current flowing in the circuit?

0.6 A

0.75 A

3.0 A

3.75 A

None

10.

What is the definition of potential difference (V) between two points?

The rate of flow of charge between the two points.

The opposition to the flow of charge between the two points.

The work done to move one coulomb of charge from one point to another.

The total energy supplied by a source to move one coulomb of charge in a complete circuit.

None

1 out of 10